2
Pan Tilt Controller Interface Module
Port Description
Connection
Type
To Camera
RS-485 data input/ video input
6 Pin DIN jack
To DVR
Serial data output / video output
6 Pin DIN jack
SW 1 -6
Camera ID selection
6 Pin DIP switch
TO CAMERA
- transmits the Pan/Tilt control signals from the VistaPro 4 to the DCP1000 Dome Camera
- receives the video signal from the DCP1000 Camera to the VistaPro 4.
TO DVR
- receives the RS-485 signal from the PC’s Comm port (via the ACC-RS232 connector)
- transmits the video signal that comes from Pan/Tilt Dome Camera to DVR.
6 PIN DIP SWITCH
- sets the Channel ID of Pan/Tilt Dome Camera to correspond to the channel on the VistaPro4.
Refer to the diagram below for how to set the Dip Switch to correspond with a camera.
1 2 3 4 5 6
ON
CAM
ID: 1
1 2 3 4 5 6
ON
CAM ID: 2
1 2 3 4 5 6
ON
CAM ID: 3
1 2 3 4 5 6
ON
CAM ID: 4
①
CAMERA INPUT
CONNECTOR
②
DVR INPUT
CONNECTOR
③
6PIN DIP
SWITCH
①
②
③
