background image

Thank you for purchasing the L114 Digital Video Surveillance Recorder. Lorex is committed 
to providing our customers with a high quality, reliable security product.

The L114 series offers excellent performance at a value price. This small form (9x12x2") 
surveillance DVR provides real time recording in quad mode and single channel, as well as 
audio recording and motion detection. The L114 also has a remote control and password 
protection.

To learn more about the DVR, and to learn about our complete range of accessory products, 
please visit our website at:

www.lorexcctv.com

CAUTION

 

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION

: TO REDUCE THE RICK OF ELECTRIC SHOCK DO 

NOT REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral 
triangle, is intended to alert the user to the presence of uninsulated 
"dangerous voltage" within the products ' enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock

The exclamation point within an equilateral triangle is intended to 
alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature accompanying 
the appliance.

WARNING

: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

: TO PREVENT ELECTRIC SHOCK, MATCH WIDE 

BLADE OF THE PLUG TO THE WIDE SLOT AND FULLY 
INSERT.

Summary of Contents for L114V251























































Reviews: