www.lorexbaby.com
LB2221AC1B_QSG_TRILINGUAL_R1
Page 1
1-20022013
ADD-ON CAMERA
LB2221AC1B
QUICK START GUIDE
x1
x2
x1
What’s Included
Getting Started
1
2
1
2
Make sure all power cables are at least 3ft / 1m
away from the crib and out of reach of your child.
Place the camera and both monitors within 1ft of each other.
Make sure the camera and the monitors are turned on.
Pairing the Camera with Your Monitor
3
Connect the power adapter to the camera and
then to a power outlet.
Press the power button
to turn on the camera.
Tap / to select the channel you wish to pair the camera to.
4
6VDC
800mA
Press to open
the main menu
Tap
NOTE:
If a camera is already connected to this channel,
the new camera will replace the existing camera.
6
Press and hold the
power button on
the camera you are
pairing for 3 seconds.
NOTE:
Immediately move the camera away from the
monitor to avoid speaker feedback.
Live video from the camera is displayed on the
monitor.
OPTIONAL.
Repeat steps 2-6 to pair the camera to
a second monitor.
7
5
Tap
NOTE:
The number shown in the icon will vary depending
on the pairing channel.
NOTE:
If pairing was unsuccessful, repeat steps 2 to 6
of the pairing process.
x2
x2
NOTE:
This camera is wall mountable.
Please see the User’s Guide provided
with LB221PK29 for details.
Use the included cable clips to help keep
power cables away from your child.
TIP
Feed the power cable through the two plastic
brackets on each cable clip. Position the clip
against a wall or floor.
Remove the adhesive guard
when you are prepared to
install the clip.
Wrap excess cable around
the brackets.
