Dimensions
5.9” / 150mm
2.8”
71mm
3.2” / 80mm
Copyright © 2018 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right
to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE. All rights reserved.
LBV8541X_LBV8543X_QSG_EN_R2
4K Ultra HD Active Deterrence
Security Camera
• 4K Ultra HD Active Deterrence Security Camera
• Mounting Kit*
• BNC / Power Extension Cable*
• Power Adapter**
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels noted in
the camera’s specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of
intense light.
• Use only the supplied regulated power supply provided with the product. Use of
a non-regulated, non-conforming power supply can damage the product and void
the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh,
chemical-based cleaners.
• The supplied cable is rated for surface and in-wall mounting only. Cables for
floor-to-floor installations are sold separately (CMR type). These and other cables
are available at
lorex.com
.
• Point the camera where there is the least amount of obstructions
(i.e., tree branches).
• Install the camera where vandals cannot easily reach.
• Secure cabling so that it is not exposed or easily cut.
• This camera is rated for outdoor use. Installation in a sheltered location is
recommended.
* Per camera in multi-camera packs.
** A multi-camera power adapter that provides power to multiple
cameras or individual power adapters may be provided depending on
product configuration.
• For a full list of compatible recorders, visit
lorex.com/compatibility
• Not intended for submersion in water. Installation in a sheltered location
recommended.
• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes
between Day/Night viewing modes, an audible clicking noise may be heard from
the camera. This clicking is normal, and indicates that the camera filter is working.
Quick Start Guide
English Version 2.0
LBV8541X / LBV8543X SERIES
Package Contents
ATTENTION:
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with
this camera (included).
Only the included power adapter can be used.
Use of
a non-regulated, non-conforming power supply can damage this product and
voids the warranty.
Safety Precautions
Installation Tips
Disclaimers
www.lorex.com
Connecting the Cameras
Changing the DVR to 4K Resolution
The output resolution of a Lorex HD DVR is set to 1080p as a default. To view 4K
resolution on a 4K monitor, the output resolution must be changed using the DVR
menu.
To change the output resolution through a Lorex HD DVR:
1. Right-click on the Live View to access the Quick Menu.
2. Click
Main Menu
and then click the Setting icon (
).
3. Click
Setting
>
Display
.
4. Click the
Display
tab.
5. In the
Resolution
drop-down menu, select
3840 x 2160
.
6. Click
Apply
to save and click
OK
to exit.
Problem
Solution
No picture / signal
• Only use the approved power supply and 4K
extension cables provided with camera.
• Ensure that you have set the DVR to 4K output
resolution. See ‘Changing DVR to 4K Resolution’
for details.
• The cameras are only compatible with certain Lorex
HD DVRs. For the full list of compatible recorders,
visit
lorex.com/compatibility
• Ensure your TV or monitor is on the correct input
channel. Common terms for input channels: INPUT,
AV CHANNEL, LINE1, LINE2, AUX.
• Ensure your DVR is properly connected to your TV
or monitor.
• Ensure connections are properly connected.
• Ensure the camera power supply is plugged in.
• Ensure that you only use the included power cable.
Picture is too bright
• Ensure your camera isn’t pointed directly at a
source of light (e.g., sun or spot light).
• Check the brightness settings of the DVR and
monitor.
• Move your camera to a different location.
Picture is too dark
• Check the brightness and contrast settings of the
DVR and monitor.
Night vision is not working
• Only use the approved power supply and 4K
extension cables provided with camera.
• The night vision activates when light levels drop.
The area may have too much light.
Picture is not clear
• Only use the approved power supply and 4K
extension cables provided with camera.
• Check the camera lens for dirt, dust, spiderwebs.
Clean the lens with a soft, clean cloth.
• Make sure that the cable run is within the
limitations specified in the section ‘Cable Extension
Options’.
Bright spot in video when
viewing camera at night
• Night vision reflects when pointing a camera
through a window. Move the camera to a different
location.
The camera warning
light is not switching on
automatically
• Ensure that you have enabled and configured white
light deterrence using a compatible DVR. See your
DVR’s documentation for more information.
• Ensure the active areas and schedule for white
light deterrence are set properly. The default
schedule for the warning light is night times
(between 5PM and 7AM).
The camera siren is not
switching on automatically
• The camera siren cannot switch on automatically.
You can control the camera siren manually using
the Lorex Cloud app or a compatible DVR.
Troubleshooting
