105
Appendix B: Connecting a PTZ Camera
2
(Optional) In the
Time
field, select the number of seconds the camera will remain in that
position during PTZ cruise before going to the next position.
3
Click
Set
to set the preset. The Total and No. field will automatically increase. The Total field
shows you the total number of created presets, and the No. field shows you the number of the
preset you are currently creating.
Save Presets
Clear Preset
Set Preset
Go To Preset
Total Number
of presets
Preset number
Time shown
before changing
4
Complete the steps above to create additional presets as needed. Press
Save
when you are
finished to save all created presets.
Selecting PTZ Presets
1
In the
No.
field, select the number of the preset you would like to select.
2
Click
Go to
to go to the preset.
Deleting PTZ Presets
1
In the
No.
field, select the number of the preset you would like to delete.
2
Click
Clear
to delete the preset and click
Save
to save your changes.
Starting / Stopping PTZ Cruise
When PTZ cruise is enabled, the camera will cycle through saved presets. You must set and
save presets to use PTZ cruise.
To start / stop PTZ cruise:
1
Right-click to open the Menu Bar and click the Start Cruise button (
). Enter the system
password. The camera will cycle through PTZ presets.
• To stop the PTZ cruise, right-click to open the Menu Bar and click the Stop Cruise button (
).
Enter the system password.
Summary of Contents for LH020 BLACKBOX2 SERIES
Page 16: ...xiv...
