8
P/T Camera
26mm
Ceiling mounting
switch
1
Hold the included P/T mouting plate against
the wall. Use a pencil to mark 2 holes in the
wall with centers exactly 26mm apart. Drill
holes where you have marked.
Hold the included P/T mounting plate
against the ceiling. Use a pencil to mark the
centers of the 3 mounting slots. Drill holes
where you have marked.
NOTE:
Make sure that the lone mounting
slot points toward the viewing area.
Tap anchors into holes with a hammer. Insert
screws 2/3 of the way.
2
OR
94mm
34mm
Place the camera on the mounting plate and
twist clockwise to lock in place.
5
NOTE:
For ceiling mounting, use the ceiling mounting
switch on the bottom of the P/T camera to flip the video
image.
Option 2
Option 3
Option 1
If wall mounting:
If ceiling mounting:
Align the slots on the mounting plate with the
screws and push down to lock in place.
3
Tighten the screws to secure the mounting
plate in place.
4
Viewing area
Lone mounting slot
Summary of Contents for LIVE SD 4.2 Series
Page 138: ......
