Viewing Mode
To Enter V
iewing Mode
Auto Record Behavior
Full-screen (Single camera selected)
Press
to open Full-
screen / switch camera
When motion is detected on selected camera, the camera is recorded in Full- screen.
Sequence (Cameras automatically switch ever
y
6 seconds;
icon
on screen)
Press
once
When the camera that is currently on the screen detects motion, that camera is recorded in Full-screen.
Motion detection is disabled on channels that
are not currently on-screen.
Scan Mode (Display is off when motion is not detected; SCAN LED is on)
Press
When motion is detected on any connected camera, that camera will be opened on the monitor and recorded in Full-screen. After recording is finished, the display will tur
n off.
Quad Mode (4-way split- screen shows multiple cameras)
Press
twice
In Quad Mode, recording star
ts when motion is detected on any camera. If the
Recording Mode is set to Single Channel, it will record the triggered camera in full-screen and then retur
n to Quad Mode. If the Recording Mode is set to Quad
Channel, it will record the entire screen in Quad Mode. To select the Recording Mode, see
“Selecting Quad or Single-Channel Motion
Recording Mode” on page 28
.
Auto Recording Modes
ENGLISH
23
Summary of Contents for LIVE SD 4.2 Series
Page 138: ......
