The following instructions are based on the LNR400 Series NVR. See your
NVR’s instruction manual for instructions on controlling the PTZ camera with
your system. For the latest list of compatible NVRs, please visit
www.lorextechnology.com/compatibility
.
To connect the PTZ camera to the system:
1. Connect the camera to your NVR as detailed in 3
,
page 3.
2. Right-click on the live view of the PTZ camera and click
Main Menu
. Enter
the system user name (default:
admin
) and password (default:
000000
) if
prompted.
3. Click
>SETTING>PAN/TILT/ZOOM
.
4. Under
Channel
, select the channel your PTZ camera is connected to.
5. Under
PTZ Type
, select
Remote
.
6. Click
OK
. You can now control your PTZ camera using the system.
6.1
Controlling the PTZ Camera
1. In Live View, double-click the channel that has the PTZ camera connected
to open in full-screen.
2. Right-click and click
PTZ
. Enter the system user name and password if
prompted. The PTZ menu opens.
3. Use the on-screen controls to control the camera.
#LX400075; r.41474/41994; en-US
17
