Controlling the PTZ camera with LNR / NR Series NVRs
2. Click the
Pattern
tab.
3. Under
Pattern
, enter the pattern you would like to configure.
4. Move the camera into the desired start position and click
Start
.
5. Move the camera into the desired end position and click
End
.
6. Right-click to return to the advanced PTZ controls window.
To run a pattern:
• Under
No.
, select the number of the pattern you would like to go to and
click
.
NOTE
•
The camera's full panning range is 355°. However, we recommend you do not make
the camera pan more than 270° between any two points in a pattern.
•
For instructions on how to control the PTZ camera using the smartphone or tablet app,
refer to your NVR's instructional manual.
#LX400075; r.41474/41994; en-US
22
