3
Connecting The Camera
Connecting The Camera
Camera Setup
To install the camera:
1
Use the included mounting screws to mount the stand to the mounting surface:
• Mark the position of the screw holes on the wall
• Drill holes and insert the drywall plugs as needed
• Firmly attach the stand to the wall using the provided screws
• Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the camera
to the power adapter.
• Before starting permanent installation, verify its performance by
observing the image on a monitor when camera is positioned in the
same location/position where it will be permanently installed.
Installation Warnings
• Aim the Cameras to best optimize the viewing area: Select a location
for the camera that provides a clear view of the area you want to
monitor, which is free from dust, and is not in line-of-sight to a strong
light source or direct sunlight.
• Avoid installing the cameras where there are thick walls or
obstructions between the Cameras and the Receiver*.
• Select a location for the camera that has an ambient temperature
between 14°F~122°F (-10°C~50°C)
• For outdoor use, installation under a shelter is recommended.
*Avoid installing in a location which requires the wireless signal to pass through cement,
concrete, and metal structures. This will reduce the range of transmission.
For details, see “Appendix C: Facts About Digital Wireless Cameras” on page 11.
