7
Connecting The Camera
Powering Multiple Receivers Using The Power Splitter Cable
(LW2110PK2 only)
The power splitter cable allows you to connect two receivers to one power adapter.
To connect the power splitter cable to the receivers:
1
Connect the power adapter to the power splitter cable (see Figure A
below).
2
Connect the ends of the power splitter cable to each of the receivers.
3
Connect the power adapter to a 120V power outlet.
On-Screen Display
1
Signal Indicator
:The signal indicator shows the strength of the signal being received from the
camera. The number of bars in the signal indicator shows the strength of the signal.
One or no bars indicates the signal is poor. Four bars indicate a very strong signal.
2
Status Indicator
: The status indicator message "Connecting" appears when the receiver is
trying to locate a camera.
ATTENTION:
If the signal is low (e.g. 1 or 2 bars) adjust the antennas, or reposition the
camera or receiver to improve signal strength.
Splitter cable
Power Outlet
Power Adapter
Figure A
Signal Indicator
Status Indicator