6
Installing the Wireless Receiver
5. Installing the Wireless Receiver
Before powering on the receiver, make sure to first connect and
power on the camera. This will ensure a proper connection.
1
Screw the wireless antenna to the back of the receiver.
2
Connect the yellow video cable and white audio cable (mono) to your TV, DVR, or observation
system.
• Use the RCA/BNC adapter (included) to connect the video cable to a BNC port.
3
Connect the power cable to the power adapter. Plug the power adapter into a power outlet or
surge protector.
4
Place the receiver in a place that will have clear reception to your camera
1
.
5.1 On-Screen Display
1
Signal Indicator
: The signal indicator shows the strength of the signal being received from
the camera. The number of bars in the signal indicator shows the strength of the signal.
One or no bars indicates the signal is poor. Four bars indicate a very strong signal.
2
Status Indicator
: The status indicator message "Connecting" appears when the receiver is
trying to locate a camera.
ATTENTION:
If the signal is low (e.g. 1 or 2 bars) adjust the antennas or reposition the
camera or receiver to improve signal strength.
1. Avoid installing in a location which requires the wireless signal to pass through cement, con-
crete, and metal structures. This will reduce the range of transmission.
Signal Indicator
Status Indicator
1
2