www.lorexcctv.com
LW2301AC1 SERIES QSG_EN_R1 Page 2
ConneCtInG CAMeRA PoWeR ADAPtoR
Connect one end of the camera Power Adaptor to the camera and the other end to an electrical outlet.
It’s all on the Web
For detailed setup information,
please refer to your User’s Manual.
For additional information, please
visit our website
www.lorexcctv.com/support
1. Press MenU on the wireless receiver or remote control.
2. From the Main Menu, select Pairing and press the
enter button.
3. Select Camera 2, Camera 3 or Camera 4 and press the
enter button.
4. Following the on-screen prompt, press the Pair button
on the rear panel of the camera. You have 30 seconds
to press the PAIR button on the camera. Once paired,
the camera will be immediately displayed on-screen.
note: If you do press the Pair button on the camera during
the 30 second pairing window, repeat steps 1~4 to try the
pairing process again.
Pairing Button
ADDInG tHe ACCessoRy CAMeRA to yoUR systeM
The Pairing Function assigns each camera to a different
channel on the wireless receiver (connect up to 4
Cameras), and is necessary for configuring additional
cameras. By default the camera that came with the
LW2301 system is assigned to channel no. 1.
note: It is highly recommended to pair the Accessory
Camera to the Receiver before permanently mounting the
camera. For detailed information, please check the
owners manual for the LW2301 system available at
www.lorexcctv.com
Connect power adaptor to
local 120V AC power outlet
CoLoR DIGItAL WIReLess InDooR/oUtDooR
ACCessoRy MotIon CAMeRA
LW2301AC1 seRIes - qUICk stARt GUIDe
