www.lorextechnology.com
LW2731AC1 Series Quick Start Guide_R1 Page 2
For more information, refer to the User’s
Guide or visit
• Mount the camera indoors or outdoors.
For outdoor installation, mount it in a
sheltered place where it is not directly
exposed to rain or snow.
• Aim the cameras for the best possible
viewing area: select a location for the
camera that provides a clear view of the
area you want to monitor, which is free
from dust, and is not in line-of-sight to a
strong light source or direct sunlight.
• Avoid installing the cameras where
there are thick walls, obstructions, or
interference (i.e. transformers, microwave
ovens or other electrical equipment)
between the cameras and the receiver.
• Select a location for the camera with
an ambient temperature between
14°F~122°F (-10°C~50°C)
• Before starting permanent installation,
have another person hold the camera for
you while you check the signal strength
and image quality on the monitor.
INSTALLING THE CAMERA
INSTALLATION WARNINGS
1. Carefully unpack the camera.
2. Mount the stand to the wall or
ceiling (for ceiling mounting you
may need to move the antenna
sightly down):
• Mark the position of the screw
holes on the wall/ceiling.
• Drill holes and insert the drywall
plugs as needed.
• Firmly attach the stand to the wall
using the provided screws.
3. Screw the antenna onto the
camera.
4. Attach the camera to the stand
either at the bottom or back of
the camera. For ceiling mounting
attach to the back thread. Loosen
the thumbscrews to adjust position
of the camera and tighten to fix
position.
5. Remove the protective film from
the front of the camera.
CAMERA OVERVIEW
1. Microphone:
Built-in microphone
2. Lens:
Camera lens
3. PIR Sensor:
Passive IR motion sensor
4. Speaker:
Speaker for intercom
5. Night Vision IR:
Night vision IR LEDs
6. Pair:
Pairing button
7. Antenna:
Wireless antenna
8. Power Cable
7
8
4
6
5
1
2
3
SIMPLY AWARE
™
DIGITAL WIRELESS INDOOR/OUTDOOR ACCESSORY MOTION CAMERA
LW2731AC1 SERIES - QUICK START GUIDE
•
Before you install the camera, carefully plan where and how it will
be positioned, and where you will route the cable that connects the
camera to the power adapter.
• Avoid installing in a location which requires the wireless signal to
pass through cement, concrete and metal structures. This will
reduce the transmission range.
• It is recommended to pair the accessory camera to the receiver
before permanently mounting the camera. For detailed information,
please see reverse.
