Controlling the PTZ Camera with your MPX DVR
5
NOTE
•
There is a 5 second minimum pause between presets.
•
Tour panning / tilting speed is slower than manual panning / tilting speed. The reduced speed maxi-
mizes reliability.
NOTE
The camera's full panning range is 355°. However, we recommend you do not make the camera pan
more than 270° between any two points in a tour.
5.2.3
Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click
to open the
PAN/TILT/ZOOM
menu.
2. Click the
Pattern
tab.
3. Under
Pattern
, enter the pattern you would like to configure.
4. Move the camera into the desired start position and click
Begin
.
5. Move the camera into the desired end position and click
End
.
6. Right-click to return to the advanced PTZ controls window.
To run a pattern:
• Under
No.
, select the number of the pattern you would like to go to and click
.
NOTE
The camera's full panning range is 355°. However, we recommend you do not make the camera pan
more than 270° between any two points in a pattern.
NOTE
For instructions on how to control the PTZ camera using the smartphone or tablet app, refer to your DVR's
instructional manual.
#LX400075; r.34576/35919; en-US
16
