- 19 -
Relay Control
Click the ‘Relay’ tab to bring up the relay controls.
Clicking these buttons will activate the corresponding external relay
outputs.
PTZ Control
Click the ‘PTZ’ tab to bring up the Pan/Tilt/Zoom controls.
The following controls are available:
•
Camera Selection to control Pan/Tilt/Zoom/Focus
•
Tilt up/down (
▲
/
▼
)
•
Pan left/right (
◄
/
►
)
•
Zoom in/out (+/-)
•
Focus in/out (+/-)
•
Auxiliary
(1,2,3)
Color Control
Click the ‘Color’ tab to bring up the picture adjustment controls.
You are able to control the brightness, contrast, hue and saturation of the
video image.
Audio Control
Move the slider to control the audio volume.
Record Control
The first button in this group enables/disables any recording schedules
defined in the Setup mode. Note that this affects all schedules, including
Motion and Sensor time sets.
Use the A or B buttons to set group recording ‘ON’ or ‘OFF’.
Use the individual channel button to activate/deactivate recording on a
per channel basis.
Channel Control
Use these controls to change the display views.
Use the A or B buttons to select the two 8 channel groups.
Use the 1 – 8 channel buttons to select
Full Screen Mode
Right click on the view screen and select Full Screen to expand to a full
screen view. Right click again to return to the default screen.
Shutdown
Click here to shutdown the Server program.
