- 27 -
6. Sensor Input/Output Options
Sensor select:
Select the sensor input to configure.
For each sensor:
Sensor Enable
: If checked, this sensor is enabled.
Normally Closed
: Choose this option if using a Normally Closed sensor rather than Normally Open.
Description
: Describe the location where this sensor is installed.
Sensor Type
: Describe the type of sensor used.
Sensor event duration
: Set the record duration that will occur when this input is triggered. (1~60 sec)
Camera recording association:
Select cameras to be associated and recorded together when this sensor
input is activated.
Output association:
Select the output condition(s) that will occur when this input is activated.
Speaker out
: If selected, the speaker will be activated according to the ‘Speaker, Relay out’ setup when this
input is triggered.
Mail out:
If selected, the capture-mail will be sent according to ‘Mail’ setup when this sensor is triggered.
Relay out (1,2,3,4):
If selected, the relay will be active according to the ‘Speaker, Relay out’ setup when this
sensor input is activated.
