background image

• The items for

which “YES” is set
are recorded. The
items for which
“NO” is set at step
6 above are not
recorded.

13

960-Hour Time Lapse Video Cassette Recorder

960-Hour Time Lapse Video Cassette Recorder

26

6  Press the SET - (or +) button to set “YES” for the functions described

below.

Time  . . . . . . .The time is displayed.
Date . . . . . . . .The Month-Day-Year is displayed.
Frame Cnt  . . .The number of frames is displayed.
Alarm Cnt . . . .The number of alarms is displayed.
Counter  . . . . .The counter is displayed.
Title  . . . . . . . .The title is displayed.

•  A maximum of 20 characters can be used (letters, numbers or spaces).

7  Press the SHIFT

button to set the display position.

8  Press the SET - (or +) button to set the position of the time, date, frame

cnt. alarm cnt. to “L-Bottom (or R-Bottom).

• If any of 4 items is set, the position of 4 items is changed identically.

9  Press the SET - (or +) button to set the position of the counter and title to

“C-Top” (or “R-Top” or “L-Top”)

If one of 2 items is set, the position of 2 items is changed identically.
L-Top / C-Top / R-Top
: Left Top / Center Top / Right Top
L-Bottom / R-Bottom
: Left Bottom / Right Bottom

10 Press the MENU button three times, the normal screen is displayed.

The setting procedure is now complete.

Picture Search

1  Press the FF/CUE (or REW/REVIEW) button, during normal playback.

• The image can be seen while the tape is advanced (or rewound) at

high speed.

2  To return to normal playback, press the PLAY button. 

Still Image

1  Press the PAUSE/STILL button, during normal playback.

• A still image can be viewed.

2  To return to normal playback, press the PLAY button.

• With each press of the PAUSE/STILL button, the still image is

advanced one image (frame).

Vertical Lock Control

During still image mode,

1  Press the TR button to reduce the vertical rolling of the

image.

2  If it cannot be corrected, press the TRACKING - button.

Slow

1  With each press of the FF button, during still image mode, the slow

speed will change as indicated below. 
1/15times 

→ 

1/20times 

→ 

1/30times (forward direction)

2  With each press of the REW button, during still image mode, the slow

speed will change as indicated below. 
1/15times 

1/10times 

→ 

1/5times (forward direction)

3  To return to normal playback, press the PLAY button.

Recording Check

During recording, press the REC CHECK button.

• The tape will be rewound for about 5 seconds and slow play mode will

be performed. The VCR will then return to the previous recording
mode.

• During picture

search, noise 
(horizontal bars) will
appear in the
picture.

• The sound is muted.

• If still mode contin-

ues for 5 minutes or
more, the VCR will
go into stop mode to
avoid damaging the
tape.

• If the image is

unstable (rolling 
vertically), adjust the
tracking control to
correct.

• During recording

check operation,
recording is
suspended 
momentarily.

Special Playback

Summary of Contents for SG-7924

























Reviews: