4
Time Lapse Video Cassette Recorder
Back Panel
1
AC POWER CORD
2
WARNING OUT terminal
3
SERIES IN terminal
4
COM terminal
5
SERIES OUT terminal
6
SW OUT terminal
7
VIDEO OUT jack
8
VIDEO IN jack
9
AUDIO IN jack
10 TAPE END terminal
11 PANIC IN terminal
12 COM terminal
13 ALARM OUT terminal
14 ALARM IN terminal
15 MIC(microphone input) jack
16 AUDIO OUT jack
3
Time Lapse Video Cassette Recorder
6
Power Loss indicator :
Flashes on after power loss.
7
CNT indicator : CNT
Comes on when the tape or alarm counter is on.
8
SPD indicator : SPD
Comes on when the play or recording speed is on.
9
AM indicator : AM
(PM : “AM” off )
10 RMC.L indicator : RMC.L
Comes on when the RMC LOCK sw is set to the “ON”
position.
11 S.REC indicator : S.REC
Comes on when “YES” is selected in the menu for the
series recording.
12 R.REC indicator : R.REC
Comes on when “YES” is selected in the menu for the
repeat recording.
13 SET LOCK SW indicator :
Comes on when the SET LOCK sw is set to the “ON”
position.
14 Mode display
• TAPE COUNTER display (ex:10:HOUR,59:MINUTE)
- Maximum Hour : 19 - Maximum Minute : 59
• ALARM COUNTER display (ex: A:Alarm , 32:Alarm No.)
• PLAY/REC SPEED display (ex: 960H:Play/Recording
Speed)
• TIME display (ex: 7:HOUR , 07:MINUTE)
• ERROR display (ex: E:Error , 04:Error No.)
- E-01 : The cassette cannot be loaded or unloaded.
- E-02 : The tape stops.
- E-03 : The drum can not rotate properly.
- E-04 : The tape is cut/broken.
• AUDIO ON display (ex: A:Audio , 12H:Play Speed)
