It’s all on the web
Quick Set-up Guide
Image Device
CMOS B&W
Resolution
240 TV lines
Lens
3.6 mm
Illumination
0 LUX @ F2.0 with IR LEDs
Power Requirement
500 mA (included)
Dimensions
2.5” x 3.5” x 1.5”
Housing
White
5. Operate the Camera
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
w w w . l o r e x c c t v . c o m
V I S I T
Lorex Technology Inc
.
Copyright © 200
6
Lorex Technology Inc
As our products are subject to continuous improvement, SVII and its
subsidiaries reserve the right to modify product design, specifications
and prices, without notice and without incurring any obligation. E&OE
ACCESSORY 2.4 GHz 4 CHANNEL
B&W WEATHER RESISTANT*
CAMERA
B U S I N E S S & H O M E
Use the channel selector switch to set the accessory
wireless camera to a different channel than the other
wireless cameras that are already connected.
Holding this button for 3 seconds turns the camera
ON/OFF. An LED light will be illuminated when the
camer is set to “ON”.
Please refer to the Owner’s Manual of your original system
for instructions on setting the Dwell Time and Auto Scanning
Specifications
For optimum reception, you may need to try changing
to alternate channels on both the receiver and camera, between
1-4.
* IP44 rated for Indoor and Outdoor use. Not recommended for direct
exposure to water, rain or snow
light shows the
current channel
repeatedly press
to choose channel
Model SG6223
Congratulations! You have successfully
expanded your Wireless Security System.
