background image

 

General Precautions 

 

 

3

General Precautions 

1. All warnings and instructions of this manual should be followed 
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water 
dampened cloth for cleaning 
3. Do not use this unit in humid or wet places 
4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should 
not be blocked 
5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, 
antenna, and cables to protect the unit from electrical surge 

FCC CLASS B NOTICE 

Note: 

 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not in-stalled and used in accordance with the instruction, may 
cause harmful interference to radio communications. 

 

However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception (which can be determined 
by turning the equipment on and off), the user is encouraged to try to correct the interference by one 
or more of the following measures: 

 

o

 

Reorient or relocate the receiving antenna 

o

 

Increase the separation between the equipment and receiver 

o

 

Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected 

o

 

Consult the dealer or an experienced radio or television technician for assistance 

This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and 
LVD. Therefore, it is designated to provide reasonable protection against interference and will not 
cause interference with other appliance usage. 

 

However, it is imperative that the user follows this manuals guideline to avoid improper usage which 
may result in damage to the unit, electrical shock and fire hazard injury 

 

In order to improve the feature functions and quality of this product, the specifications are subject to 
change without notice from time to time. 

 

LOREX TECHNOLOGY INC. 

 

http://www.lorexcctv.com 

Summary of Contents for SG7381













Reviews: