1. Package Contents
2. Installing the Camera
3. Camera Diagram
4 x Cameras
1. Mount the camera stand to the desired mounting
surface. Attach the camera to the supplied stand.
2. Aim the camera. Remove the protective film from
the lens.
3. Connect the Extension cable to the camera.
Connect the other end of the Extension Cable to
the Observation System or DVR.
Note:
Confirm that the arrows
on the DIN Extension cable
are aligned with the Camera
Cable and System ports when
connecting the cable. If the
pins in the DIN Cable are bent,
the Camera will NOT function
6-PIN DIN Connection:
4x Camera Stands
Lift the plastic tab on
the lower edge of
the camera to
remove the
protective film.
Note:
Test the cameras prior to selecting a permanent
mounting location by temporarily connecting the
Cameras and Cables to the System.
Cameras with 6 Pin DIN connections draw
power from the Observation System or
DVR. Additional power adapters are not
needed for these cameras.
System Connection Diagram:
4 x 100’ (30m) DIN
Extension Cables
Infra-Red
LEDs
Camera
Lens
Micro-
phone
Adjustable
Stand
DIN Input
Connector
Features:
•
High Resolution Image Sensor
•
24 High Intensity IR LEDs provides effective night
vision range up to 50 ft. (15 m)**
•
Day / Night mode: Picture automatically switches to
B&W delivering better clarity in low light conditions
•
Built in microphone provides one-way audio from the
camera to the system
•
Weatherproof*** Cameras ideal for indoor and outdoor
applications (IP66)
•
100 ft.(30m) extension cable included per camera
•
Ceiling or Wall Mountable Camera with versatile stand
provides flexible mounting options
** Night Vision Range up to 50ft. (15m) in ideal conditions. Objects
at or beyond this range may be partially or completely obscured,
depending on the camera application.
*** Not recommended for submersion in water.
NOTE -
This Camera includes a Mechanical Auto IR Cut Filter.
When the Camera changes between Day/Night lighting, an audible
clicking noise may be heard from the camera. This clicking is nor-
mal, and indicates the Camera filter is working.
NOTE:
The camera can be mounted to either a wall or
a ceiling.
