11
Camera Setup
Camera Setup
1. Adjust the camera height and position using the angle
adjustment thumbscrew on the base.
The camera can be permanently attached to a surface using
the provided screws (3 attachment screws), or it can simply be
placed to stand on any flat surface.
2. Confirm that the camera power is in the
OFF
position. Connect
the Power Adapter to the camera and to a wall outlet.
• Connect the 5V camera power
supply adapter to the camera,
and connect to a wall outlet.
Note
: Confirm that the Power
adapter used is labelled ‘Camera’
• The camera should be charged for
approximately 2 hours prior to use
(the Camera Charge LED will light
up indicating a charge is in
progress), however the camera can be used immediately when connected to a wall outlet.
The 2 hour charge time is for the Lithium Battery to reach full charge.
• Once the camera has reached Full Charge, the LED indicator will turn off.
3. Turn ON the camera by changing the power switch from
OFF
to Channel 1.
• A green Power LED will light up indicating the camera is
ON.
