13
Viewing the Camera
Viewing the Camera
Video can be viewed immediately (with the AC Adapter connected to the Wireless Camera),
however if portable use is desired, the camera Lithium Battery must be charged for 2 hours.
1. Power up the Receiver and the Camera.
2. Set the Camera to
CH1
(the Wireless Receiver is set to CH1 by default).
3. Set the
MONITOR / TV
to
VIDEO MODE (or AUX MODE / TV/VIDEO / GAME MODE
etc.).
See your specific MONITOR or TV Manual for further instructions)
Please ensure that the
CAMERA
and
RECEIVER
are set to the same channel!
IMPORTANT:
You may find some static on the picture at a selected channel setting. For
optimum viewing reception, you may need to change the channels on
BOTH
the Camera
and Receiver to a different channel (between CH1-CH4).
BOTH
the Camera and Receiver
must be set to a matching channel. If Static persists on your image, try adjusting the Antenna
on the Wireless Receiver and Camera.
