To install the camera:
1. Mount the camera stand to the desired mounting surface.
2. Attach the camera to the stand at either of the two
connection points at the back of the camera.
3. Connect the extension cable to the camera:
ATTENTION
- Test all connections and ensure the camera is working
correctly prior to permanent installation by temporarily connecting the
camera(s) and cable(s) to the viewing/recording solution.
Wall Mount
Ceiling Mount
Table Mount
Top Thread - Ceiling mount or
wall mount
Bottom Thread - Table mount or
wall mount
Connect the BNC and
power connectors to the
camera.
Connect the BNC connector to
the video input of the monitor/
DVR, and connect the included
power connector to a power
adapter.
Male power connector
Female power connector
BNC Connector
To Camera:
To Monitor/ DVR:
Contents
Features
• Ultra High Resolution image sensor produces 540 TV
lines of resolution.
• Advanced noise reduction improves image quality and
recording storage efficiency.
• Capable of viewing images up to 80ft (24m)* away in
total darkness with IR night vision.
• 3.6mm wide angle lens ideal for most common
surveillance applications.
• IP67 rated housing for indoor / outdoor installations**
* IR illumination range under ideal conditions. Objects at or beyond this range
may be partially or completely obscured, depending on the camera
application.
** Not recommended for submersion in water
• Camera
• Sunshade
• Mounting Stand
• 66 ft. BNC/Power Extension Cable
• BNC to RCA Adapter
• 12V DC Power Adapter
• 3x Mounting Screws
• 3x Drywall Anchors
Installation Tips
• Point the camera towards a direction where there is the
least amount of obstructions (i.e. tree branches).
• Install the camera in a location that is difficult for
vandals to reach.
• Secure cabling so that it is not exposed or easily cut.
• Connect your system and cameras to a back-up power
supply. This ensures the system continues to record
during power outtages.
Installing The Camera
Warning / Caution Statements
1.
Read this guide carefully and keep it for future reference.
2.
Follow all instructions for safe use of the product.
3.
Use the camera within given temperature, humidity and voltage levels noted
in Camera Specifications.
4.
Do not disassemble the camera.
5.
Do not point the camera directly towards the sun or a source of intense light.
6.
Use only the supplied regulated power supply. Use of a non-regulated, non-
conforming power supply can damage this product and voids the warranty.
7.
The supplied extension cable is rated for surface mounting only.
Cables for in-wall / floor-to-floor installations are sold separately.
Setup Diagram
DVR/CCTV MONITOR
Video IN
TV/VCR
Video IN
Attach the included BNC to RCA adapter to connect the
extension cable to RCA inputs (i.e. for a TV connection).
Accessories
BNC to RCA Adapter
(included)
BNC to RCA Adapter
