113
iPad App
English
4. Under
PIR
, select
ON
to enable Push Alarm Notifications when motion is detected
using the PIR motion sensor or
OFF
to disable.
5. Under
Sound
, select
ON
to enable Push Alarm Notifications when sound is detected
by the camera or
OFF
to disable. Under Sound Sensitivity, select a sensitivity for
Sound Push Alarm Notifications between
1
(lowest) and
10
(highest).
6. Tap
Update
to save your settings.
7.4.4 EDITING CAMERA MOBILE STREAMING SETTINGS
Configure the camera image quality settings for streaming to mobile devices (i.e. smart
phones and tablets). Please note that less bandwidth is generally available over mobile
networks than over WiFi or Ethernet.
To edit mobile streaming settings:
1. In Camera List, tap
next to the camera.
2. Tap
Stream Settings
.
Select Mobile Bandwidth
Enable/disable auto resolution and
frame rate adjustment
Select Resolution
Enable/disable audio streaming to
iPad
Select Frame rate
3. Under
Bandwidth
, select the bandwidth for your mobile connection. If you are mainly
connecting using WiFi, you may set this setting higher.
4. Under
Auto
, select
ON
to have the camera automatically select the resolution and
frame rate based on available bandwidth. Or, select
OFF
to manually select the
resolution and frame rate. If you select OFF, configure the following:
• Under
Resolution
, select the resolution that will be used when connecting to the
camera using a smart phone or tablet:
320x240 (QVGA)
or
640x480 (VGA)
. Tap
Done
to confirm.
