51
L-View 116 for PC
English
3. Under
Place
, select
Outdoor video
if the area with the camera is brightly lit. Select
Indoor Video
if you notice strip lines in the image or if the picture is too dark on the
Outdoor video setting. Select
Indoor video + Sunlight
if the picture is too bright on
the Indoor Video setting.
• If you select Indoor Video or Indoor Video + Sunlight, select
60Hz
or
50Hz
to adjust
the camera for the frequency of your indoor lighting.
4. Under
Video Flip
, select
Video Flip
to flip the camera image vertically and
horizontally or select
Normal
for normal orientation.
5. Under
Brightness
, select the brightness of the image between
10
(highest) and
1
(lowest).
6. Under
Low Light Sensitivity
, set the camera’s sensitivity in low light environments
between
Very High
(highest),
High
, and
Normal
(lowest).
7. Check
Enable time display on video
to turn on video time stamps or un-check it to
disable video time stamps.
8. Under
Microphone
, select
Enabled
to enable the built-in microphone on the camera
or select
Disabled
to disable the built-in microphone on the camera.
9. Click
Update
to save changes. Enter the camera admin username (default:
admin
)
and password (default:
left blank
) and click
OK
. The camera will disconnect. Wait
about 15 seconds and then double-click the camera in Camera List or Auto Search to
reconnect to the camera.
