9
Pairing Cameras
ENGLISH
7. Pairing Cameras
IMPORTANT
The camera and the receiver have already been paired out of the box, which
means that they are exclusively communicating with each other. If for some
reason the pairing is lost, follow these steps to pair the camera and receiver.
To pair the camera to the receiver:
1
Make sure that the camera and receiver are both powered up and all antennas are properly
attached.
2
Press and hold the
PAIR
button on the receiver for 5 seconds to activate pairing mode.
The pairing status LED will flash on and off slowly.
Pairing Status LED
Pair button
3
Press the
PAIR
button on the back of the camera within 30 seconds of pressing the
PAIR
button on the receiver.
• If pairing is successful, live video from the camera will appear on the monitor.
Pair button
Summary of Contents for Vantage LW2231
Page 71: ......