®
Equipment
General Overview
The LT5000D employs state of the art inverter technology. 50/60Hz frequency is inverted to high
frequency (over 100 KHz) by V-MOSFET followed by step down voltage and rectification current.
Using Pulse-Width-Modulation (PWM) technology, the inverter power supply generates powerful
DC welding currents.
By applying switch power inverter technology, the dimensions and weight of the main transformer
is significantly reduced; while efficiency is increased by 30%.
Main Characteristics
• Stabilization
• Reliability
• Portability
Suitable for stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials;
there are many applications for plasma cutters.
Input voltages
110-220V, 1-PH, 50/60 Hz
Input current
110-220V, 1-PH, 20 A
Output current
10-50 A
Duty cycle @ 40°C (104°F)
60% @ 50A, 110V
60% @ 50A, 220V
Dimensions with handle
15’’ (381mm) L; 6’’ (152.4mm) W; 12’’ (304.8mm) H
Weight w/ 8'11’’ (2.7 m) torch
22.5 lbs (10.2 kg)
Gas Supply
Clean, dry, oil-free air
Recommended gas inlet
flow rate / pressure
3.6 scfm @ 65 psi
Input power cable length
6’ (1.8 m)
Power supply type
Inverter - IGBT
Accessories
Plasma Torch (9' 9")
Plasma Consumables (installed on the torch head)
Air Filter/Regtulator
Ground Clamp & Cable
Connections, (like Air Hose etc.)
User Manual
• Power efficiency and low noise output
• High cutting speed
• Smooth cuts
6
Specifications
Summary of Contents for LT5000D
Page 1: ... LOTOS TECHNOLOGY Plasma Cutter LT5000D www uwelding com ...
Page 19: ... ...
