---------------------------------------------------------------------------------------- Section Updated: 2/5/2009 6:53 AM at http://www.lotus-europa.com ----------------------------------------------------------------------------------------
14
CLUTCH
Make and type
Ferodo 200 D, diaphragm spring
Operation
Cable
Driven plate diameter
7.875 in. (20 cm.)
Clutch assembly adjustment
See Section 'Q' (Clutch)
Free movement at withdrawal lever
.078/.125 in. (2/3 mm.)
TRANSMISSION
Type
4 forward speeds, all synchromesh and reverse
Bearings
- Mainshaft
Taper rollers
- Secondary gear cluster
Taper rollers
Bearings adjustment
See Section 'F' (Transmission)
Gear ratios
- Top
1.03:1
-3rd.
1.48:1
-2nd.
2.25:1
- 1st.
3.61:1
-Reverse
3.08:1
Final drive:
Type
Hypoid gear
J
Bearings
- Pinion
Taper rollers
- Diff./crown wheel assy.
Taper rollers
Bearings adjustment:
Pinion bearing pre-load
See Section 'F' (Transmission)
Crown wheel/pinion backlash
.005/.010 in. (.127/.254 mm.)
Number of teeth
- Crown wheel
32
- Pinion
9
Final drive ratio
3.56:1
Speedometer gears:
Driving Gear
Driven Gear
46 F 6049, 6 teeth
46 F 6108, 12 teeth
Pink
Blue
Overall ratios - Top
3.666:1
- 3rd.
5.268:1
- 2nd.
8.010:1
- 1st.
12.851:1
- Reverse
10.964:1