52
Reversing Lamp, Parking Aid & Camera
With the ignition switched on selection of
reverse gear will cause:
- Reversing lamp to illuminate.
- Reverse parking aid system
(if fitted)
, to
activate automatically and sound with
an audible beep and detect objects at
bumper height within the detection
zone of approximately 1.5 m beyond the
rear of the car.
When within this range, an intermittent
beeping will be heard, which increases
in frequency as the distance is reduced,
becoming a continuous tone at around
300 mm. Be aware that the sensitivity
of the system will vary according to the
size, position and material/density of an
object.
ohe113
REVERSING LAMPS - PARKING AID
1.5 m maximum
HAZARD WARNING LAMPS
Note that with ignition on the tell
tales will indicate the current status.
Turn Indicators:
Operative only with the
ignition switched on. Move the lever down
to indicate a left hand turn and up for a
right hand turn. The tell tale lamp
illuminates when the turn indicators are
operating.
The switch will be cancelled when the
steering wheel is returned to the straight
ahead position.
When signalling a lane change, lightly
pressing the switch for less than a second
will trigger three flashes of the turn
indicators.
Hazard Warning Lamps
To activate:
press the switch located
within the switch cluster.
When activated the switch graphic, exterior
turn indicators and tell tale lamps
will flash in unison accompanied by an
audible tone.
To cancel:
Press the a second time to
switch off.
WARNING
If stalled or stopped for emergency
repairs, move the car well off the road,
switch on the hazard warning lamps
and mark the car with other warning
devices as available to reduce the risk
of a collision.
FASCIA & SWITCHES
E132T0324JA Federal Evora 400 From SOP OHB English Language.indd 52
15/08/2018 14:47:02