INSTRUCTIONS FOR USE
Translation of the original instructions
13
4 INSTRUCTIONS FOR USE
4.1
General information
This appliance must only be used for its expressly intended purpose for cooking or heating food. Any other
use is considered improper. The appliance is also intended for industrial use and must only be used by
personnel trained for use and aware of the risks that the hot element entails.
Warning
The appliance operates at high temperatures, so the following is necessary:
·
Pay attention to the areas surrounding the hot surface during routine normal operation
(danger of scalding);
·
RISK OF BURNS Do not touch hot surfaces floor with your hands or other parts of the body
to avoid burns caused by high temperatures;
·
After switching off the appliance, wait for a sufficient time for it to cool before carrying out
any cleaning or maintenance operation.
4.2
Glass-ceramic cooker hob
On the front panel, a plate is indicated above the knob to which it corresponds, marked by the index
·
Turn on the switch located upstream of the appliance. Turn the control knob that corresponds to the plate
from "O" to the desired heating level, between 1 and 6
·
The indicator light turns on as soon as the appliance is powered
·
The plates are formed by a core and a ring; turning the knob as shown above turns on only the core of
the plate; turning the knob past position "6" also turns on the ring and the temperature can be adjusted
again between pos. "1" and "6"
Note
·
Each plate is connected to a power regulator, which makes it possible to select from among 6
different temperatures. Higher temperatures are recommended at the start of cooking
·
Each plate has a temperature limiter that is triggered when the temperature that was reached could
damage the glass