Installation (Continued):
Installation Instructions
ADVANTAGE LED
4. Drill the mounting holes at the place of installation (i.e. shelf / ceiling). Make sure that no cables or other lines are concealed in the area
of drilling.
5. Insert the suitable installation cable through the washer in the hole. (The washer can be moved into the desired position by slightly pulling.)
Connect the cable end with the saddle at the connecting plate. Pay attention to the correct polarity.
6. Fix the LED light plate onto the base.
Louvers International 851 N. Church Court, Elmhurst, Illinois 60126 │ P: 800.543.3765 │ F: 800.568.8377 www.louversintl.com
Page 2 of 3
Chain Support Arm
M5/M6
X 2
Chain Support Arm
Mounting Bracket
Housing Bracket
Standard
3.7 ft - lb min
H05/H07 RN-F
#18 - 3 / #16 - 3
0.4 inch min.
approx. 6 in.
0.314 - 0.47 in.
