S E T- U P A N D O P E R A T I O N W I T H R 1 7 2 0 R E M O T E C O N T R O L
M O T O R A S S E M B LY
R 1 7 1 0 M O T O R
SET-UP LOWER LIMIT
1. Press and hold the LIMIT button on the remote until the motor jogs 4 times
and then release the button.
2. Press DOWN button on the remote to move the blind down and press
STOP when desired lower limit is reached.
3. To set the lower limit more accurately press DOWN and the motor will run
down in steps.
4. Press CONFIRM button on the remote and the motor will jog 2 times, the
lower limit is set.
CHANGE MOTOR DIRECTION
1. Press UP button on the remote, if the blind goes up then
the motor direction is okay.
2. To change the motor direction hold down the LIMIT button
and then press STOP button on the remote transmitter,
the motor will jog to indicate the direction has been changed.
PAIRING AN ADDITIONAL REMOTE WITH THE MOTOR
1. Hold down the SETTING button on the motor until it jogs 2
times and then release the button.
2. Press the CONFIRM button within 10 seconds. The motor will jog 2
times and the remote is now paired with the motor.
PAIRING THE REMOTE WITH THE MOTOR
1. Select the channel for the blind using the C/- button.
2. Hold down the SETTING button on the motor until it jogs 2 times
and then release the button.
3. Press the CONFIRM button within 10 seconds. The motor will jog 2
times and the remote is now paired with the motor.
Setting button (Red)
Setting button (Red)
Primary
Secondary
1
1
2
2
1
2
1
2
3
4