Louvolite R1722, Setup And Operation

SET-UP MID-POINT LIMIT

8. Press Up   or Down   button on the remote to move the blind and

press Stop   when desired mid-point limit is reached.

9. Press and hold the Limit button first then whilst holding Limit press Up 

button on the remote until the motor jogs 2 times. Mid-point is now set.

10. Press Stop   to move the blind to Mid-point position.

8

9

10

SET-UP UPPER LIMIT

5. Press Up   button on the remote to move the blind up 

and press Stop   when desired upperlimit is reached.

6. Press Up   or Down   button and the motor will run in

steps to set the upper limit accurately.

7. Press Confirm button on the remote and the motor will jog

2 times, the upper limit is set.

5

6

7

PLEASE NOTE: The group channel will be recorded on the motor automatically when the single channel has been programmed on the 

motor. Cycle through the channels until all the lights are lit to access the group channel on the remote.

DELETE ORIGINAL HANDSET ON MOTOR

1.  Press and hold Setting button on the motor mount 

and the motor will jog (4 times in one motion) and 

then release the button.

FAQ: IF THE MOTOR DOES NOT WORK
•   Please charge the motor battery first.

•  If the motor does not stop at the required point, then the stops must be reset.

DELETE MID-POINT LIMIT
11.  Press Up   or Down   button on the remote to send

blind to upper or lower limit.

12.  Press and hold Limit button first then whilst holding Limit

press Up   on the remote until the motor jogs. 

Mid-point is now deleted. 

11

12

Setting button (Red)

1

ATTACHING THE SOLAR PANEL
•  Make sure the motor has enough charge to operate the blind.
•  Attach the solar panel to the charge port on the motor using the 1.4m 

charge cable.

•  Place/ fix the solar panel so that it is facing direct sunlight.

SET-UP LOWER LIMIT
1. Press and hold the Limit button on the remote until the motor jogs 4 

times and then release the button.

2. Press Down   button on the remote to move the blind down and

press Stop   when desired lower limit is reached.

3. To set the lower limit more accurately press Up   or Down   

and the motor will run in steps to set up the lower limit accurately.

4. Press CONFIRM button on the remote and the motor will jog 2 

times, the lower limit is set.

CHANGE MOTOR DIRECTION
1.  Press Up   button on the remote, if the blind goes 

up then the motor direction is okay. 

2. To change the motor direction hold down the LIMIT 

button and then press Stop   button on the remote

transmitter, the motor will jog 2 times to indicate

the direction has been changed.

1

2

3

4

1

2