Caution
1. Do not expose motor to humid, damp or extreme temperature conditions.
2. Do not drill into motor.
3. Do not cut the antenna and keep it clear from metal objects.
4. Do not allow children to play with this device.
5. If power cable or connector is damaged, do not use.
6. Ensure correct crown and drive adaptor are used.
7. Ensure power cable and aerial is clear and protected from moving parts.
8. Cable routed through walls shall be properly isolated.
9. Motor is to be mounted in horizontal position only.
10. Before installation, remove unnecessary cords and disable equipment not needed for
powered operation.
11. Installation and programming to be performed by a qualified professional, use or
modification outside the scope of this instruction may void warranty.
Setting Notice
Important Safety Instructions To Be Read Prior To Operation
1. Before the first use, please charge the battery and make sure it is fully charged before use.
2. Don’t operate motors when low voltage alarm.
3. Operating:
- The valid interval of the emitter button is 6S, the emitter will quit the set after 6S.
- The motor will run for hint, please do the next step after the hint.
4. Set the limit position:
- When setting upper/lower limits, the upper/lower limit position cant be the same.
- After the limit setting, with power off and memory function.
- Limit delete will clear all limit memory.
- It will exit limit setting when program there is no operation for 2 minutes.
5. If the emitter lost, please set up again with the new emitter.
3
