Your blind will be supplied with either Easybreak
®
connectors attached to the
operating chain or a cord tidy that will need to be fitted to the wall.
Easybreak
®
System
Two Easybreak
®
connectors are connected to the operating chain 200mm apart.
This ensures that at least one of them will be in the vertical position ensuring they
perform as required.
If excessive weight is applied within the loop an Easybreak
®
connector will break
apart.
If an Easybreak
®
connector comes apart then it will need to be re-connected.
To re-connect, check the Easybreak
®
connector for damage. If undamaged,
re-connect the chain by inserting the last ball on the end of the chain into the
larger hole of the connector and push it into place.
Easybreak
®
Connector
Tensioned System using cord tidy.
If the blind is fitted with a continuous loop chain then a cord tidy will be attached
to the chain. This must be fitted to the wall as follows:
Fitting a side fix cord tidy.
The cord tidy is a two piece device and will arrive with a disposable red tab fitted
to it.
200mm apart
Child Safety
