I6
0
4
G
B
I
0
9
1
9
3
1
1
0
0
4
4
2
6
GB
TECHNICAL CHARACTERISTICS
Supply
Rated voltage Us 100 - 240V
~
110 - 250V=
Operating voltage range 90 - 264V
~
93.5 - 300V=
Frequency 45 - 66Hz
Power consumption/dissipation 1W - 3VA
Immunity time for microbreakings <= 25ms
Recommended fuses F1A (fast)
Voltage input
Maximum rated voltage Ue 480VAC L-L (277VAC L-N)
Measuring range 90…576V L-L (50...415VAC L-N)
Frequency range 45…66Hz
Measuring method True RMS
Measuring input impedance L-N - L-L > 8M
Ω
Wiring mode Single-phase, two-phase, three-phase with or without
neutral or balanced three-phase system.
Recommended fuses F1A (fast)
Current inputs
Rated current Ie 1A
~
or 5A
~
Measuring range For 5A scale: 0.025 - 6A
~
For 1A scale: 0.025 – 1.2A
~
Type of input Shunt supplied by an external current transformer
(low voltage). Max. 5A
Measuring method True RMS
Overload capacity +20% Ie
Overload peak 50A for 1 second
Burden (per phase)
≤
0.6W
Measurement accuracy
Measuring conditions
Temperature +23 °C ±2 °C
Voltage (phase to neutral) ± 0.5% (50…415V
~
) ±0.5 digit
Voltage (phase to phase) ± 0.5% (90…720V
~
) ±0.5 digit
Current ± 0.5% (0.1…1.2In) ±0.5 digit
Active Energy Class 1 (IEC/EN 62053-21)
Reactive energy Class 2 (IEC/EN 62053-23)
Additional errors
Temperature 0.05%/°K per V, A, W
Insulation
Rated insulation voltage Ui 600V
~
Rated impulse withstand voltage Uimp 9.5kV
Power frequency withstand voltage 5.2kV
Ambient conditions
Operating temperature -20 - +60°C
Storage temperature -30 - +80°C
Relative humidity <80% (IEC/EN 60068-2-78)
Maximum pollution degree 2
Overvoltage category 3
Measurement category III
Climatic sequence Z/ABDM (IEC/EN 60068-2-61)
Shock resistance 15g (IEC/EN 60068-2-27)
Vibration resistance 0.7g (IEC/EN 60068-2-6)
Connections
Type of terminal Plug-in / removable
Conductor cross section (min… max) 0.2…2.5 mm² (24…12 AWG)
UL Rating 0.75…2.5 mm² (18…12 AWG)
Conductor cross section (min… max)
Tightening torque 0.56 Nm (5 LBin)
Housing
Version Flush mount
Material Polycarbonate
Degree of protection IP40 on front - IP20 terminals
Weight 330g
Certifications and compliance
Certifications obtained EAC
Comply with standards IEC/EN 61010-1, IEC/EN 61010-2-030, IEC/EN 61000-6-2,
IEC/ EN 61000-6-3
