I271
I
GB
F
E
02
17
31100324
I
29
M02 - UTILITA’ UdM Default Range
P02.01 Lingua English English
Italiano
Francais
Espanol
Portoguese
P02.02 Contrasto LCD % 50 0-100
P02.03 Intensità retroilluminazione display alta % 100 0-100
P02.04 Intensità retroilluminazione display bassa % 30 0-50
P02.05 Tempo passaggio a retroilluminazione bassa sec 30 5-600
P02.06 Ritorno a pagina di default sec 60 OFF / 10-600
P02.07 Pagina di default VL-L VL-L / VL-N ...
P02.08 Sotto-pagina di default INST INST / HI / LO /
AVG / MD /GRAPH /
1-8
P02.09 Tempo di aggiornamento display sec 0.5 0.1 - 5.0
P02.06
– Se impostato ad OFF il display rimane sempre nella pagina dove è stato lasciato dall’utente. Se impostato ad un valore, dopo questo tempo il display ritorna alla pagina impostata con P02.07.
P02.07
– Numero della pagina alla quale il display ritorna automaticamente una volta che è trascorso il tempo P02.06 dall’ultima pressione di un tasto.
P02.08
– Tipo di sotto-pagina alla quale il display torna dopo trascorso P02.06.
P03.01
– Se impostato ad OFF, la gestione delle password è disabilitata e l’accesso alle impostazioni e al menu comandi è libero.
P03.02
– Con P03.01 attivo, valore da specificare per attivare l’accesso a livello utente. Vedere capitolo Accesso tramite password.
P03.03
– Come P03.02, riferito all’accesso livello Avanzato.
M03 - PASSWORD UdM Default Range
P03.01 Utilizzo password OFF OFF-ON
P03.02 Password livello Utente 1000 0-9999
P03.03 Password livello Avanzato 2000 0-9999
P04.01
– Selezione della modalità di calcolo delle misure integrate.
Fisso
= Le misure istantanee vengono integrate per il tempo impostato. Ad ogni scadenza del tempo, la misura integrata viene aggiornata con il risultato dell’ultima integrazione.
Scorrevole
= Le misure istantanee vengono integrate per un tempo = 1/15 del tempo impostato. Ad ogni scadenza di questo intervallo viene sostituito il valore più vecchio con il nuovo calcolato. La misura integrata
viene aggiornata ogni 1/15 del tempo impostato, considerando una finestra scorrevole nel tempo che comprende gli ultimi 15 valori calcolati, di lunghezza totale equivalente al tempo impostato.
Sincronismo
= Come modalità fisso, ma gli intervalli di integrazione sono scanditi da un ingresso digitale esterno programmato con la funzione sincronismo.
Bus
= Come modalità fisso, ma gli intervalli di integrazione sono scanditi da messaggi di sincronismo inviati sul bus seriale.
P04.02
– Tempo integrazione misure AVG (media) per le potenze attiva, reattiva ed apparente.
P04.03, P04.04, P04.05
– Tempo integrazione misure AVG (media) per le relative grandezze.
M04 - INTEGRAZIONE UdM Default Range
P04.01 Modo integrazione Scorr. Fisso / Scorrevole
Sincronismo / Bus
P04.02 Tempo integrazione potenze min 15 1-60
P04.03 Tempo integrazione correnti min 15 1-60
P04.04 Tempo di integrazione tensioni min 1 1-60
P04.05 Tempo di integrazione frequenza min 1 1-60
P05.01
– Se OFF i contaore sono disabilitati e la pagina di misura dei contaore non viene visualizzata.
P05.02
– Se OFF il contaore parziale non viene incrementato. Se ON viene incrementato quando il multimetro è alimentato. Se abbinato ad una delle variabili interne (LIMx-INPx-BOOx) viene incrementato solo quando
questa condizione è vera.
P05.03
– Numero del canale (x) della variabile interna eventualmente usato nel parametro precedente. Esempio: Se il contaore parziale deve contare il tempo per cui una misura è oltre una certa soglia, definita dal
limite LIM3, programmare LIMx nel parametro precedente e specificare 3 in questo parametro.
M05 - CONTAORE UdM Default Range
P05.01 Abilitazione generale contaore ON OFF-ON
P05.02 Abilitazione contaore parziale ON OFF-ON- INPx-
LIMx-BOOx
P05.03 Numero canale (x) 1 1-8
P06.01
– Seleziona la misura da visualizzare sul grafico Trend.
P06.02
– Decide se la scala verticale si adatta automaticamente ai valori visualizzati oppure se viene definita fissa dall’utente.
P06.03
– Valore di fondo scala definito dall’utente. L’unità di misura diventa quella della misura selezionata.
P06.04
– Moltiplicatore del valore di fondo scala.
M06 - GRAFICO TREND UdM Default Range
P06.01 Misura per pagina trend kW (tot) VL-L (eq) AVG
AVG kW (tot) AVG
kvar (tot) AVG
kVA (tot) AVG
P06.02 Autorange scala ON OFF-ON
P06.03 Valore fondo scala 1000 0-1000
P06.04 Moltiplicatore fondo scala x1 x1 - x1k - x1M