14
15
GB
2. The breast pump is equipped with a touch screen. Touch the on/off icon to start expressing. You will hear a
sound signal. You will hear a sound signal during every change of settings on the control panel. (fig. 2).
3. At the same time, the pump unit starts counting from 0 to 30 minutes. When the timer reaches 30 minutes, the
engine switches off. If you touch on/off icon during expressing, the pump will turn off. The second touch of the
on/off icon will start counting down again. The breast pump will switch on and immediately start working in the
stimulation phase on the first power level.
4. To adjust the suction power in the stimulation phase to your needs, regulate it’s level by touching (+) or (-)
icons.
5. If you want to start the expression phase, press the button 6, fig. 2.
6. By touching the (+) or (-) icons on the control panel, you can adjust the suction power in the expression phase
to suit your needs. You can return from expression to stimulation phase by touching the same button on the
control panel 6, fig 2.
7. There are 9 stimulation modes and 9 expression modes.
8. If you prefer to skip the stimulation phase or when the milk begins to flow earlier, touch the icon no. 6 (fig. 2) to
change the phase.
9. If the device was powered from the mains, disconnect the AC power adapter from the socket and turn off the
device using the main switch.
NOTE!
Before putting the breast pump away from the breast, make sure it is turned off. If necessary, you can put the
breast pump away during pumping by placing your finger between the pad and the breast (just as you do it when
putting the child away).
WARNING!
The breast pump switches off automatically after 30 min. of work. The breast pump switches off
irrespective of whether or not it was adjusted during pumping.
MODE SWITCH
After connecting to the power supply, press the button 9 fig. 2 to turn on the device. The breast pump will start
running on mode 1 – the default setting. Press the main switch (1) when the device is disconnected from the AC
power supply to start operation on battery. Press and hold for a moment the button 9 fig. 2 to start the breast
pump operation.
SUCTION POWER
When you turn off the breast pump and restart it, it will start working at mode 1 of the stimulation phase. If milk
gets under the silicone massaging cushion, reduce the suction level so that milk keeps up flowing into the bottle.
1
Summary of Contents for Expert 3D Pro
Page 11: ...20 ...