Lovi EXPERT, Instruction Manual

13

GB

Place connected elements (funnel with silicone cushion) on 

the breast pump body (fig.1d). Make sure that all parts tightly 

fit to each other. 

Place the bladder with stopper inside the goblet of breast 

pump body (fig 1d). Pushing the edges of the bladder, 

remove any irregularities. Make sure that the bladder adheres 

tightly to the edge of the goblet.

Place the handle holder (fig 1g) on the breast pump body (fig. 

1d) and rotate in a clockwise direction in such a way that the 

hinge for the handle will be located on the opposite side of 

the funnel.

Put the handle (fig. 1h) on the hinge so that the inner cap 

stopper (fig. 1g) will go through the opening placed on the 

top side of the handle. Then push to the hollow until you 

hear a click sound.

Place the valve membrane (fig. 1k) in the valve opening 

(fig. 1j). The membrane should be flat and tight to avoid air 

leaks.Then place valve with the membrane inside the breast 

pump body (fig. 1d) and make sure all components are 

interconnected.

Place bottle adapter(fig.1l) on the bottle (fig. 1i) in clockwise 

dirrection. Screw this set into breast pump body  (fig 1d) in 

the same way. A complete set can be placed in the bottle 

stand. (fig 1m).