background image

time the infrared Laser emission and the red led are activated the device will emit a short 
acoustic signal. The movements with PERFECT SKIN must be slow holding the device 
perpendicular to the treating area  so as to allow the Laser and LED to transfer the 
necessary energy to the skin for the anti-aging treatment, by focusing on the areas mainly 
affected by imperfections (wrinkles). The treatment duration for the hemiface is 15 
minutes. At the end of the time,  the device will emit a triple acoustic signal before 
automatically turning off, which indicates  the end of the program for the treated 
hemiface. Once ended the treatment, turn on again the device, as indicated in this 
procedure, set it for the FACE program and perform the treatment on the other hemiface. 
Perform the same movements by focusing on the areas mainly affected by imperfections 
(wrinkles) until the triple acoustic signal of the device, which indicates the end of the 
treatment on the hemiface and the end of the first FACE treatment.   
Repeat the treatment for at least 3-4 times per week. 
 
BODY TREATMENT 

-

 

To improve skin imperfections caused by cellulite (PEFS); 

-

 

To improve the state of stretch marks and obtain a drainage effect. 

 
The BODY treatment must be performed on clean, dry and without cream body skin. 
Please remove any jewel or dress that may be reflective to the area to be treated or to 
the adjacent area. Open the box containing the PERFECT SKIN LASER, remove the device 
case and press the power button until the green light led of the BODY program will turn on 
by making sure to never direct the lens, and thus the Laser beam and the LED, toward the 
eyes. Put the device lens in contact with body skin by keeping it as much perpendicular 
as possible. The treatment is performed by treating one area of the body (for example the 
right thigh) at a time and it must start form the lower part of it moving it slowing toward the 
upper part. It is important to treat the whole area of the body trying to distribute the red 
LED and infrared Laser energy homogeneously to the entire surface.  Each time the 
infrared Laser emission and the red led are activated the device will emit a short acoustic 
signal. The movements with PERFECT SKIN must be slow holding the device perpendicular 
to the treating area so as to allow the Laser and LED to transfer the necessary energy to 
the skin for the treatment of imperfections, by focusing on the mainly affected areas 
(cellulite and stretch marks). The treatment duration is 20 minutes. At the end of this time, 
the device will emit a tripe acoustic signal before automatically turning off. Once ended 
the treatment on the selected area of the body, turn on again the device, as indicated in 
this procedure, set it for the BODY program and perform the treatment on the other side. 

Summary of Contents for Perfect Skin
















Reviews: