©2021 Lowell Manufacturing Co. | X-Rev.10-21-21
4
Chapter 2. Product Overview and Setup
NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is damaged.
Please keep the original package in a safe place for future use.
2-1: Rear panel view
1)
DC connector: connects to either UPS or 2nd battery box
2)
DC breaker: Battery over-current protection breaker
3)
External battery numbers detection port: detects the numbers of connected batteries.
2-2: Installation and setup with UPS
Unpacking and inspection.
1)
Remove the battery box from the packing. Note: The battery box is very heavy. Be cautious when
unpacking and lifting the unit to avoid injury.
2)
Check the inside package
•
Battery box unit
•
Quick guide
•
Battery connection cable x 1
•
Detection cable x 1
•
Ear x 2 & screw x 8
•
Extended stand
