©2021 Lowell Manufacturing Co. | X-Rev.10-21-21
8
Chapter 4. Battery Installation
If your battery box is not installed with batteries, please follow proper procedure to put batteries inside of
unit.
NOTE:
MAKE SURE THAT THE BATTERY BOX IS DISCONNECTED FROM THE UPS BEFORE
PERFORMING THE FOLLOWING SEQUENCE OF OPERATIONS.
4-1. UPS-XBPA-36
Step 1: Open the package and place the battery box on a horizontal plane.
Step 2: Remove the removable front panel part by pulling it from the lower extremity.
Step 3: Remove the fixed part of the front panel by removing the 2 screws.
Step 4: Remove the metal top cover of the battery box by unscrewing 6 screws present on the two sides (3 on
the right side and 3 on the left), 3 screws on the top and 4 screws on the back side.
Step 5: Once battery box is opened, remove the battery fixing plate present on the left side by unscrewing 2
screws present.
