Technical Manual LÖWEN Dart HB8
01/2019
77
7.2.14
t15 - SEL Pnt: Printout Machine Settings
Printout of all machine settings (programmed features).
1.
Press [TEST] button on the controller board.
tSt
appears in TEMP SCORE display.
2.
Press [OPTIONS II] to confirm.
3.
Press [GAMES] or [OPTIONS I] until
SEL Pnt
appears in player 1 – 2 display, and
t15
in TEMP
SCORE display.
4.
Press [OPTIONS II] to start the test.
Pr IN t LO N9
appears in Cricket display.
5.
Put the DATAreader or a similar readout device into the VDAI connector (left side of the cashbox
compartment). Data transfer starts automatically, according to the DATAreader settings (short/ middle/
long – with/ without deletion).
6.
If necessary:
Press [GAMES] button to switch printout length from long to short.
Pr IN t SH Or t
appears in the
Cricket display.
7.
Pull out the DATAreader as soon the transmission is finished. The DATAreader signals end of
transmission by a bleep.
8.
Press [PLAYER CHANGE] button to leave the printout menu.
NOTICE
The printout is determined by machine, used periphery as well as the readout
device’s settings. Following is an exemplary printout which does not
necessarily correspond to the actual printout.
2011.10.13 10:23 V01.10
Exemplary long printout
Auslessp: DrSpeicher
>* LOEWEN DART *<
Nr : 00000000
SYSTEM : HB8 GERMANY D
PCB : V1.00
PROG : V01.00.2
COIN CH/CREDITS/ADVS
1: 2: 3: 4: 5: 6:
Coin channels
0 0 0 2 4 8
Credit value of the individual channel
0,0 0,0 0,0 0,5 1,0 2,0
Coin type of the individual channel
BILL CH/CREDITS/ADVS
Bank note channels
7: 8: 9: 10:
Credit value of the individual channel
5 10 20 50
Bank note type of the individual channel
5 10 20 50
SHORTY FACTOR: 5
GAME:
Settings for the individual games
GAME CR RL BE
GAME: Name of the game/ CR: Credit per game/
RL: Round limit/ BE: Bullseye value
301 1 UL DBE
301DI 2 UL DBE
301DO 2 UL DBE
301IO 3 UL DBE
301MO 1 UL DBE
301IM 3 UL DBE
501