background image

 16

5.

 

After all tanks on your vessel have been set up, press 

EXIT

 repeatedly 

to return to the main display.  

Boat Setup Reset 

If you want to access the Setup screen (Boat Setup) after an engine-

tank configuration has been chosen you will have to reset the configu-

ration to default settings.  

To reset engine-tank configuration: 

1. Press 

MENU

, highlight 

S

YSTEM 

S

ETUP

 and press 

ENTER

2. Choose 

E

NG

/T

ANK 

C

FG

 and press 

ENTER

 twice. The following message 

will appear: 

Press ENTER to reset Eng/Tnk Cfg

.  

3. Press 

MENU

. The Setup Menu will appear with Boat Setup high-

lighted. 

EP-80R TH Configuration 

The EP-80R TH Temperature sensor has three configuration options: 

Inside, Outisde and Water. An unconfigured temperature sensor will 

appear on the bus devices list as UnCfg Temp.  

To configure a temp sensor: 

1. Press 

MENU

, use the 

UP

 and 

DOWN

  keys  to  select 

S

YSTEM 

S

ETUP

 and 

press 

ENTER

2. Highlight 

B

US 

D

EVICES

 and press 

ENTER

. The Bus Devices list will ap-

pear. 
3. Select an unconfigured temp sensor (

U

N

C

FG 

T

EMP

) and press 

ENTER

The following message will appear: 

Press Enter to Configure Temp Sen-

sor

4. Press 

ENTER

, which will open the Select Temp menu with three op-

tions: Water Temp, Outside Temp and Inside Temp.  
5. Highlight the desired option and press 

ENTER

. The temp is now con-

figured. You will be directed to the Bus Devices list. Press 

EXIT

 repeat-

edly to get back to the main display. 

NOTE:  

If your temp sensor is not updated on the Bus Devices list, refresh 

the list by closing it and then access it again. 

To unconfigure a temp sensor: 

1. Press 

MENU

, use the 

UP

 and 

DOWN

  keys  to  select 

S

YSTEM 

S

ETUP

 and 

press 

ENTER

2. Highlight 

B

US 

D

EVICES

 and press 

ENTER

. The Bus Devices list will ap-

pear, showing all devices detected on the network. 

Busse-Yachtshop.de     info@busse-yachtshop.de

Summary of Contents for EP-80R TH

































Reviews: