Lowrance EP-80R TH, Installation And Configuration Instructions

 26

Unconfiguring a Temp Sensor 

You could unconfigure a temp sensor by changing its temp type to un-

known or you can use the Restore Defaults command, which will reset 

the temp type and device name to default settings. 

To restore default settings

: 

1. Press 

MENU 

twice, select 

NMEA

2000

 or 

N

ETWORKING

 and press 

ENTER

. 

A menu will appear with five options: Bus Setup, Fuel Management, 

NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchroniza-

tion.  
2. Highlight 

B

US 

S

ETUP

 and press 

ENTER

, which will open the Bus Con-

figuration menu. A list of network devices will be at the top of the page. 
3. Select the desired temp sensor and press 

ENTER

. The Device Con-

figuration menu will appear.  
4. Highlight 

A

DVANCED 

O

PTIONS

 and press 

ENTER

.  

5. Select 

R

ESTORE 

D

EFAULTS

 and press 

ENTER

. The following message will 

appear: 

Are you sure you wish to change this device's configuration?  

6. Highlight 

Y

ES

 and press 

ENTER

. Press 

EXIT

 repeatedly to return to 

the main display. 

Reconfiguring a temp sensor 

A temp sensor can be reconfigured by changing its temp type. If the 

desired configuration name is already configured to another temp sen-

sor, you can unconfigure that sensor to make its configuration name 

available. 

To change Temp Type: 

1. Press 

MENU 

twice, select 

NMEA

2000

or

N

ETWORKING

 and press 

ENTER

. A 

menu will appear with five options: Bus Setup, Fuel Management, 

NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchroniza-

tion.  
2. Highlight 

B

US 

S

ETUP

 and press 

ENTER

, which will open the Bus Con-

figuration menu. A list of network devices will be at the top of the page. 
3. Select the desired temp sensor and press 

ENTER

. The Device Con-

figuration menu will appear.  
4. Highlight 

T

EMP 

T

YPE

 and press 

ENTER

. The following options will ap-

pear: Water, Outside, Inside, Engine Room, Cabin, Live Well, Bait 

Well, Refrigeration, Heating System and Unknown. 
5. Highlight the desired Temp Type and press 

ENTER

. The following 

confirmation message will appear: 

Are you sure you wish to change this 

device's configuration?  

6. Highlight 

Y

ES

 and press 

ENTER

. Press 

EXIT

 repeatedly to return to 

the main display. 

Busse-Yachtshop.de     info@busse-yachtshop.de