background image

 31

LOWRANCE ELECTRONICS 

FULL ONE-YEAR WARRANTY 

"We," "our," or "us" refers to LOWRANCE ELECTRONICS, INC., the manufacturer of 
this product. "You" or "your" refers to the first person who purchases this product as a 
consumer item for personal, family or household use. 

We warrant this product against defects or malfunctions in materials and workmanship, 
and against failure to conform to this product's written specifications, all for one (1) year 
from the date of original purchase by you. WE MAKE NO OTHER EXPRESS WAR-
RANTY OR REPRESENTATION OF ANY KIND WHATSOEVER CONCERNING THIS 
PRODUCT. Your remedies under this warranty will be available so long as you can show 
in a reasonable manner that any defect or malfunction in materials or workmanship, or 
any non-conformity with the product's written specifications, occurred within one year 
from the date of your original purchase, which must be substantiated by a dated sales 
receipt or sales slip. Any such defect, malfunction, or non-conformity which occurs within 
one year from your original purchase date will either be repaired without charge or be 
replaced with a new product identical or reasonably equivalent to this product, at our 
option, within a reasonable time after our receipt of the product. If such defect, malfunc-
tion, or non-conformity remains after a reasonable number of attempts to repair by us, 
you may elect to obtain without charge a replacement of the product or a refund for the 
product. THIS REPAIR, OR REPLACEMENT OR REFUND (AS JUST DESCRIBED) IS 
THE EXCLUSIVE REMEDY AVAILABLE TO YOU AGAINST US FOR ANY DEFECT, 
MALFUNCTION, OR NON-CONFORMITY CONCERNING THE PRODUCT OR FOR 
ANY LOSS OR DAMAGE RESULTING FROM ANY OTHER CAUSE WHATSOEVER. 
WE WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY 
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR OTHER INDIRECT DAMAGE OF 
ANY KIND. 

Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages, so the above limitations or exclusions may not apply to you. 

This warranty does NOT apply in the following circumstances: (1) when the product has 
been serviced or repaired by anyone other than us; (2) when the product has been con-
nected, installed, combined, altered, adjusted, or handled in a manner other than accord-
ing to the instructions furnished with the product; (3) when any serial number has been 
effaced, altered, or removed; or (4) when any defect, problem, loss, or damage has resulted 
from any accident, misuse, negligence, or carelessness, or from any failure to provide 
reasonable and necessary maintenance in accordance with the instructions of the owner's 
manual for the product. 

We reserve the right to make changes or improvements in our products from time to time 
without incurring the obligation to install such improvements or changes on equipment or 
items previously manufactured. 

This warranty gives you specific legal rights and you may also have other rights which 
may vary from state to state. 

REMINDER: You must retain the sales slip or sales receipt proving the date of your 
original purchase in case warranty service is ever required. 

LOWRANCE ELECTRONICS 

12000 E. SKELLY DRIVE, TULSA, OK 74128 

(800) 324-1356 

Busse-Yachtshop.de     info@busse-yachtshop.de

Summary of Contents for EP-80R TH

































Reviews: