| 7
HDS Carbon |
Quick Start Guide - EN
Cursor assist mode
Press and hold your finger on the screen to switch the cursor to cursor assist mode. The
selection tool will appear above your finger. Drag the selection tool over the desired
item.
Creating a waypoint
The waypoint will be positioned at the cursor when the cursor is active. When the cursor
is not active, the waypoint will be positioned at your current location.
¼
Note:
Press the dedicated waypoint key twice to quickly save a waypoint.
Sonar
Adjusting sonar settings
Sensitivity and Colorline are adjusted by dragging the slide bar vertically. The slide bar is
accessed by tapping
Sensitivity
or
Colorline
on the Sonar menu.
