Navigate to a waypoint
You can start navigating towards a waypoint on the panel. Position
the cursor over the waypoint, select the waypoint in the menu and
then the Goto waypoint option in the menu.
Navigate a route
You can navigate a route on the image by positioning the cursor
over the route, selecting the route in the menu and then the start
route option in the menu.
When route navigation is started, select the Navigation menu
option for canceling the navigation, skipping a waypoint, and
restarting the route from current vessel position.
Navigation settings
Arrival radius
Sets an invisible circle around the destination waypoint.
The vessel is considered arrived at the waypoint when it is within
this radius.
XTE limit
This setting defines how far the vessel can deviate from the selected
route, if the vessel goes beyond this limit, an alarm is activated.
38
Navigating
| Hook Reveal X Series Operator Manual
Summary of Contents for Hook Reveal Series
